The Blog

Installation of New Eavestrough – Regular Cleaning & Maintaining Guidelines

Installation of new eavestrough doesn’t mean you don’t have to worry about rainwater damage completely. For the eavestrough system to serve the purpose for which you install it, you must perform regular cleaning and maintenance. Essentially, you should have your eavestrough system installed by professional specialists. When installed properly, the eavestrough system is as important as the drainage system of a home.

In addition to keeping water away from the basement of a building, it protects the foundation from costly water damage. But, though installation of an eavestrough system may seem easy, it comes with risks that can be avoided by leaving the job to experts. Basically, let experts install your new eavestrough system so that it can last longer and serve you better.

Regular Cleaning and Maintaining Guidelines

After installation, you should clean your eavestrough regularly. Just like other systems in your home, the eavestrough system requires regular maintenance to serve its purpose effectively. Without regular cleaning and maintenance, your gutters will be clogged and this will cause annoyance of rainwater cascading over their sides.

You don’t want to be hit by water while walking under your eaves. But, the experience will be worse if you let leaves, sticks, and debris clog your gutters. Clogged gutters lead to backing up of water which pushes under the roof shingles. Eventually, this water moves up the building’s roof line and eventually drips into the attic. When gutters become swollen and clogged with debris, they can even fall down. With time, overflowing gutters erode the soil around the foundation leading to its subsiding. To avoid this, follow these guidelines to clean and maintain your eavestrough regularly.

  • Scoop out debris – Use a gutter scoop or garden trowel to scoop out the loose debris from the eavestrough. Start from the low end of the drain outlet of the gutter and work away from it. Doing it this way makes the task easier especially if the debris is pliable and damp than when it is dried, soggy and encrusted. Put the debris that you scoop into a bucket to reduce cleanup later.
  • Use a hose to blast out gutters – Wash out your gutter with a hose that has an on-off high pressure nozzle at the end. Work hard towards the outlet of the drain and wash out the gutters completely. Bear in mind that this job can be messy. Therefore, try to avoid mud splattering all over the house. If possible, remove the dirt that is encrusted in the eavestrough with a scrub brush.
  • Clear drainpipes obstructions – If there are obstructions in the drainpipes preventing the free flow of water try to flush debris down with a hose. If this fails to work, use a plumber’s snake or auger to pull debris out from the drainpipe’s bottom. In some cases, you may have to push it down from the top.

Maintaining a new eavestrough entails inspecting and clearing the system in spring and autumn. It’s also important that you use a stiff brush to scrub and loosen the dirt in your gutters. If unable to clean and maintain your eavestrough for any reason, engage the services of a professional company like Winnipeg Eavestrough.

Tags: ,